Skip to main content Skip to Search Box

Definition: hardening from Britannica Concise Encyclopedia

In metallurgy, an increase in hardness of a metal induced, deliberately or accidentally, by hammering, rolling, drawing (see wire drawing), or other physical processes. The first few deformations imposed by such treatment weaken the metal, but because of the crystalline structure of metal its strength increases with continued deformations. Crystals slip against each other; but, because of the complexity of the crystal structure, the more such slips are multiplied, the more they tend to place obstacles in the way of further slippage, as the various dislocation lines crisscross each other. See also carburizing, heat treating, tempering.

Name: hardening or hardening

Keywords: hardening


Summary Article: hardening
from The Columbia Encyclopedia

in metallurgy, treatment of metals to increase their resistance to penetration. A metal is harder when it has small grains, which result when the metal is cooled rapidly. Sometimes small areas on the surface of a casting are given a fine-grain structure by chill hardening; metal pieces (chills) are inserted in the wall of a sand mold. The area next to the chill cools faster and becomes harder than the surface next to the sand. Metals worked cold, as by being rolled into thinner pieces, become hardened, partly by reducing grain size and partly by distorting the shape of the grains so that they increasingly resist further distortion. Alloying may harden a metal by changing its chemical composition. In hardening by precipitation, one constituent of a supersaturated solid solution separates from the solution. Usually the process is carried out at above room temperature. At room temperature the process takes longer; it is then known as age-hardening. Aluminum-copper alloys are hardened by precipitation. Iron-carbon alloys, steel and cast iron, for example, respond well to heat treatments. By varying the percentage of carbon and the rate of cooling from a high temperature, many gradations of hardness, softness, toughness, and other properties are achieved. To impart hardness the metal is rapidly cooled from a high temperature by quenching in water, oil, or molten salt. Later heat treatment by tempering or annealing modifies the metal slightly to give other desirable qualities. Steels with a low percentage of carbon can be given a hard surface by increasing the amount of carbon at the surface so that they will respond to heat treatment, a process known as carburizing, or casehardening. One way to do this is to pack steel in charcoal and then heat it. Another way is to heat the metal in a furnace with a hydrocarbon gas atmosphere; still another is to heat the metal in a molten-salt bath containing potassium and sodium cyanides. If the salt bath cited is of a lower temperature, the steel surface will also pick up nitrogen, which helps harden it; the process is then called cyaniding. At even lower temperatures the steel picks up only nitrogen, and is nitrided.

The Columbia Encyclopedia, © Columbia University Press 2018

Related Articles


Full text Article hardening (in Materials and heat treatment)
Dictionary of Engineering Terms, Butterworth-Heinemann

Process of increasing the hardness of a material. In steel this occurs through one of the following ways. (1) By heating a high-carbon steel...

See more from Credo