Skip to main content Skip to Search Box

Definition: galvanometer from Dictionary of Energy

Measurement. an instrument that measures a small electric current by measuring the mechanical motion derived from electromagnetic or electrodynamic forces produced by the current.

Summary Article: galvanometer
From The Columbia Encyclopedia

(găl´´vӘnŏm'ӘtӘr), instrument used to determine the presence, direction, and strength of an electric current in a conductor. All galvanometers are based upon the discovery by Hans C. Oersted that a magnetic needle is deflected by the presence of an electric current in a nearby conductor. When an electric current is passing through the conductor, the magnetic needle tends to turn at right angles to the conductor so that its direction is parallel to the lines of induction around the conductor and its north pole points in the direction in which these lines of induction flow. In general, the extent to which the needle turns is dependent upon the strength of the current. In the first galvanometers, a freely turning magnetic needle was hung in a coil of wire; in later versions the magnet was fixed and the coil made movable. Modern galvanometers are of this movable-coil type and are called d'Arsonval galvanometers (after Arsène d'Arsonval, a French physicist). If a pointer is attached to the moving coil so that it passes over a suitably calibrated scale, the galvanometer can be used to measure quantitatively the current passing through it. Such calibrated galvanometers are used in many electrical measuring devices. The DC ammeter, an instrument for measuring direct current, often consists of a calibrated galvanometer through which the current to be measured is made to pass. Since heavy currents would damage the galvanometer, a bypass, or shunt, is provided so that only a certain known percentage of the current passes through the galvanometer. By measuring the known percentage of the current, one arrives at the total current. The DC voltmeter, which can measure direct voltage, consists of a calibrated galvanometer connected in series (see electric circuit) with a high resistance. To measure the voltage between two points, one connects the voltmeter between them. The current through the galvanometer (and hence the pointer reading) is then proportional to the voltage (see Ohm's law).

The Columbia Encyclopedia, © Columbia University Press 2018

Related Articles

Full text Article moving-coil meter
The Hutchinson Unabridged Encyclopedia with Atlas and Weather Guide

Instrument used to detect and measure electrical current. A coil of wire pivoted between the poles of a permanent magnet is turned by the motor effec

See more from Credo